Perfect service: 
1. Our products are shipped from USA and Germany and can arrive quickly in 5-10 days.
2. If you have any questions, please contact us and I can provide you with return/refund/compensation/replacement.
3. Note: After sending the message, don't worry. Because of our time difference, we will respond to your message within 24 hours. 100% refund for quality problems and damage

Product Analysis

Aluminum Alloy Telescopic Rod, Quick Telescopic Switch, Non-slip Handle, Aluminum Alloy Operating Rod, Angle Adjustment Switch, Left and Right Adjustment Switch, Pressure Plate Spring, Aluminum Alloy Plastic Box, Pressure Plate Control Valve

1. Aluminum Alloy Material, Large-capacity Putty Box, Pack More and Scrape a Larger Area

2. Double Spring Design, the Putty Is Discharged Evenly, and the Putty Is Pressed out at a Constant Speed When Plastering

3. the Spring Pressure Plate Can Smooth out the Unevenness at One Time, and the Pressure Plate Can Be Adjusted for Long-lasting Smoothness

4. 120 Degrees Can Be Adjusted, Respond to Various Room Types, Knob Type Stepless Adjustment

5. the Machine Head Can Be Fine-tuned to Deal with Tricky Angles, and Various Angles Can Be Plastered

6. Quickly Adjust the Lock, Lengthen the Telescopic Rod, Scrape the Ceiling, No Need to Take a Ladder

7. Just a Light Push, the Bottom Set Roller, Push Effortless

8. Stainless Steel, Leak-proof Sealing Plate, After Putty Installed, Putty Can Be Scraped off After Removal

Specifications:

Putty Box Width: 25cm

Adjustable Height of the Handle: 98cm~160cm

Material: Aluminum Alloy

Knife Body Material: Stainless Steel

Handle Material: Plastic

Large Capacity Box Can Improve Efficiency

Aluminum Alloy Material Is Lightweight and Durable

The Pressure Plate Cover Has a Wide Opening for Easy Cleaning

How to Assemble and Use

1. Make Sure the Plat Box Blade Is the Thickness of a Fingernail(1-1.5mm) Above the Skids. the Blade Can Be Adjusted Using Screws on the Blade Holder Tooobtain the Necessary Height;

2. Test That the Blade Holder Can Move up and down Freely;

3. Attach Your Plat Box Handle by Sliding It Onto the Box and Tightening the Two Wing Nuts;

4. Adjust the Tension on the Blade Holder to Suit the Gauge of Compound Which Is to Be Used in the Machine;

5. Assemble with the Handle.

6. Set the Box at a Slight Angle from the Handle and Tighten the Button Fo Fix the Angle, so the Headremains Stationary.

7. Place the Flatbox on the Joint and While Applying Pressure, Release the Button Allowing the Box and the Handle to Find Its Own Natural Position.

8. Ajust the Length of Handle: Push the Button to Extend the Length(Max. 63.8'')

Package Included:

1 X 8.9'' Flat Box

1 X 40''-63.8'' Handle